Introduction After reading the article, you can flash an incompatible Nokia phone through the J.A.F program. In the so-called 'DEAD MOD' mode. This work is written in simple accessible language, because it can be used by any owner of the Nokia phone.
What do we need? Firmware for your phone.
Hi, i own a MyAudio 704sr tablet. I downloaded firmware from official website together with Rockchip batch tool. I upgraded the firmware, here is what.
I recommend the latest version. Phone, USB cable, fully charged battery. The established program J.A.F. The description of its installation can be found on our forum in the corresponding. Computer with Windows XP, Vista. XP is recommended.
The computer should be removed from all programs related to Nokia (Nokia Ovi suite, Nokia PC suite, Nokia Software Update, various utilities, etc.). Otherwise, problems that do not need us can arise. Disable antivirus and firewall. So, let's get started.
The main part Turn off the phone, remove the battery, put it in its place. Install the driver, if, of course, it was not installed earlier. Note: we can find out about the installed drivers by looking at the installation / uninstallation: Start -> Control Panel -> Install / Remove Programs.
Two must be installed: Insert the cable, briefly press the power button (three to four seconds) on the phone, WINDOWS will find two new devices from Nokia (they will disappear after 3 seconds). Repeat this procedure five to six times with an interval of 20 seconds. We reboot the computer. Install the previously downloaded from our site the latest version on the computer.
Launch the program J.A.F. By clicking on the shortcut on the desktop, which has the name 'Start J.A.F.' A window appears in which we are required to press the 'Start' button. Then ignore the error message (Error: BOX DRIVER NOT INSTALLED) and click 'OK'. It does not affect the course of our work. In the window of the running program, select the tab BB5.
Then check 'Manual Flash', 'Dead USB', 'Factory Set', 'Normal Mode', 'Use INI'. After that, we remove the tick from the CRT 308 point, we are waiting.
A window appears in which you must select your (!) Phone model. I stitched, that's why I chose the corresponding model. After selecting the phone model, click 'OK'.
After that, the program itself finds the files it needs (previously installed) for flashing your phone. If you want, you can choose another product code (if you do not know what it is, do not touch it) by going to the product code selection tab. So, now click on the button on the right, which has the name 'FLASH'. A window will appear.
Immediately after the lines' Init usb communication. PRESS POWER ON NOW! Searching for phone.Found ', press the power button on the phone until two devices appear in Device Manager, and after that? As they appear, the firmware will automatically start.
During the firmware, the computer will find new devices. It should be so.
We are waiting for the program to perform all the operations it needs with the phone. And when the program completes the firmware, we will see in the LOG `the lines' Setting test mode. Setting FULL FACTORY. Operation took 0 minutes 7 seconds. Everything, our device is sewn. After the firmware, drivers for the phone will start to be put, if they have not been installed before.
If the window pops up, wait until all the devices are installed. When finished, click 'YES'. Now the phone itself will turn on, and we can disconnect it from the PC. Note: It is usually not possible to flash the first time, there may be various errors in the log.
This is normal. The main thing is not to drop your hand and repeat the above process before the successful firmware. When the error message 'Error reading Phone init data' appears at the start of the firmware, simply remove and reinsert the battery and repeat the process, try to hold the power button for a longer time. JayDi, Eliseev Alexey USB-firmware of 'dead' Nokia phones through the program J.A.F.